A-CAD COMMAND "CHAMFER"

CHAMFER :


Chamfer Command

Chamfer command is used to make an obtuse angle with the object is to cut corners with straight lines that have a certain distance from a vertex of the object. Chamfer command can also be done on two lines that meet or nearly meet.

To make cuts at angle you must first determine the distance of the second cutting objects. If you do not change the Distance value on the command, then the default value is 0.5.

The objects that can cut like a box and angled objects created using the command rectangle, polyline, or line.

Command: chamfer
(TRIM mode) Current chamfer Dist1 = 1.0000, = 3.0000 Dist2

Select first line or [Undo / polyline / Distance / Angle / Trim / method / Multiple]:

Select second line or shift-select to apply corner: